SOLIDIGM D3-S4620 1.92TB 2.5inch SATA 6GB/s 3D4 TLC Generic Single Pack
|
|
SOLIDIGM D3-S4620 1.92TB 2.5inch SATA 6GB/s 3D4 TLC Generic Single Pack
-
Læshastighed
550MB/s
-
Skrivhastighed
510MB/s
-
Grænseflade
Serial ATA III
-
Form factor
2.5"
-
Kapacitet
1.92TB
|
D3-S4620 Series (1.92TB, 2.5in SATA 6Gb/s x4, 3D4, TLC)
SSDSC2KG019TZ1Z
Mid-endurance SATA drives available in capacities up to 3.84TB, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs).
Specifications:
General
- Capacity 1.92 TB
- Form Factor 2.5" 7mm
- Interface SATA 3.0 6Gb/s
- Weight 62.6 gms
- Lithography Type 144L TLC 3D NAND
- Use Conditions Server/Enterprise
Performance
- Sequential Bandwidth - 100% Read (up to) 550 MB/s
- Sequential Bandwidth - 100% Write (up to) 510 MB/s
- Random Read (100% Span) 91000 IOPS
- Random Write (100% Span) 53000 IOPS
- Power - Active 3.3W
- Power - Idle 1.2W
- Latency - Random Read (typ.) 104µs
- Latency - Random Write (typ.) 47µs
- Latency - Sequential Read (typ.) 37µs
- Latency - Sequential Write (typ.) 38µs
Reliability
- Warranty Period 5 yrs
- Endurance Rating (Lifetime Writes) Up to 4.0 DWPD / Up to 14.0 PBW
- Mean Time Between Failures (MTBF) 2 million hours
- Uncorrectable Bit Error Rate (UBER) < 1 sector per 10^17 bits read
- Vibration - Operating 2.17 GRMS (5 - 700 Hz) Max
- Vibration - Non-Operating 3.13 GRMS (5 - 800 Hz) Max
- Shock (Operating and Non-Operating) 1,000 G (Max) at 0.5 msec
- Operating Temperature Range 0°C to 70°C
Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.