MOXA FIBER MEDIA CONVERTER, MULTI-M
|
|
MOXA FIBER MEDIA CONVERTER, MULTI-M
|
Beskrivelse
Specifikationer
TCF-142 Series
RS-232/422/485 to optical fiber media converters
Features and Benefits
- “Ring” and “Point-to-Point” transmission
- Extends RS-232/422/485 transmission up to:
- 40 km with single-mode—TCF-142-S
- 5 km with multi-mode—TCF-142-M
- Compact size
- Decreases signal interference
- Protects against electrical interference and chemical corrosion
- Supports baudrates of 50 bps to 921.6 Kbps
- Wide temperature models available (-40 to 75°C)
Introduction
The TCF-142 media converter is equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.
Automatic Baudrate Detection
The TCF-142 can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a device’s baudrate is changed, the signal will still be transmitted through the media converter without any data loss.
Ring Operation
The TCF-142 can be used to connect serial devices to a fiber ring. To form the ring, connect the Tx port of one TCF-142 to the Rx port of a neighboring converter. Once the ring is set up, simply use the DIP switches to configure the TCF-142 converters for “ring mode.” When one node transmits a signal, the signal travels around the ring until it returns back to the transmitting unit, which then blocks the signal. With the TCF-142, you can set up fiber rings that have a total circumference of up to 100 km.
Automatic Data Direction Control (ADDC®)
ADDC® is a patented hardware data flow solution developed by Moxa to handle RS-485 data direction control. ADDC® senses and controls RS-485 data direction automatically, making it unnecessary to use the hand shaking signal.
| • RS-232/422/485 Side |
| Connector(s) |
Terminal Block |
| RS-232 Signals |
Tx, Rx, GND |
| RS-422 Signals |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-4w Signals |
TxD+, TxD-, RxD+, RxD-, GND |
| RS-485-2w Signals |
Data+, Data-, GND |
| Baudrate |
50 bps to 921.6 Kbps |
| ESD Protection |
15 KV for all signals |
| • Optical Fiber |
| Fiber Connector |
SC or ST |
| Cable Requirements |
Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125 μm
Multi-mode: 50/125, 62.5/125, or 100/140 μm |
| Transmission Distance |
Single-mode: 40 km
Multi-mode: 5 km |
| Wavelength |
Single-mode: 1310 nm
Multi-mode: 850 nm |
| Tx Output |
Single-mode: > -5 dBm
Multi-mode: > -5 dBm |
| RX Sensitivity |
Single-mode: -25 dBm
Multi-mode: -20 dBm |
| Point-to-Point Transmission |
Half-duplex or full-duplex |
| Ring Transmission |
Half-duplex |
| • Physical Characteristics |
| Enclosure |
Aluminum (1 mm) |
| Dimensions |
Without ears: 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
With ears: 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in) |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Operating Humidity |
5 to 95% RH |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Consumption |
140 mA @ 12 V |
| Voltage Reversal Protection |
Protects against V+/V- reversal |
| Power Line Protection |
2 KV Burst (EFT), EN61000-4-4
2 KV Surge, EN61000-4-5 |
| Over Current Protection |
1.1 A (protects against two signals shorted together) |
| • Regulatory Approvals |
| EMI |
EN55022 1998, Class B |
| EMS |
EN61000-4-2 (ESD), Criteria A, Level 2
EN61000-4-3 (RS), Criteria A, Level 2
EN61000-4-4 (EFT), Criteria A, Level 2
EN61000-4-5 (Surge), Criteria A, Level 3
EN61000-4-6 (CS), Criteria A, Level 2
EN61000-4-11(DIPS), Criteria A, Level 2 |
| UL/CUL |
UL60950-1 |
| TUV |
EN60950-1 |
| FCC |
Part 15 Subclass B |
| • Warranty |
| Warranty Period |
5 years |
| |
Model No. |
Description |
|
|
|
|
|
TCF-142-M-SC |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector |
|
|
|
|
|
TCF-142-M-ST |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector |
|
|
|
|
|
TCF-142-S-SC |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector |
|
|
|
|
|
TCF-142-S-ST |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector |
|
|
|
|
|
TCF-142-M-SC-T |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-M-ST-T |
RS-232/422/485 to multi-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-S-SC-T |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, -40 to 75°C temperature range |
|
|
|
|
|
TCF-142-S-ST-T |
RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and ST connector, -40 to 75°C temperature range |
|
|
|
|
| Host-interface | RS-232/422/485 |
| Udgående interface | Fiber (SC) |
| RS-232 signaler | GND,Rx,Tx |
| Beskyttelse, højspænding | Ja |
| Overspændingsbeskyttelse | 2 kV |
| Elektrostatisk afladning association (ESD) | 15 kV |
| Fiber optisk strømstik | SC |
| Sendeafstand (multi funktion) | 5 km |
| Bølgelængde | 850 nm |
| RS-422 signaler | RxD+,RxD-,SGND,TxD+,TxD- |
| RS-485 signaler | Data+,Data-,RxD+,RxD-,SGND,TxD+,TxD- |
| RX sensitivitet | -20 dB |
| TX udgående | -5 dB |
| Baud hastighed | 921,6 Kbit/s |
| Driftstemperatur (T-T) | -40 - 75 °C |
| Lagringstemperatur (T-T) | -40 - 85 °C |
| Relativ luftfugtighed (H-H) | 5 - 95% |
| Mål (BxHxD) | 67 x 100 x 22 mm |
| Indgangsspænding | 12 - 48 V |
| Strømforbrug | 140 mA |
| Godkendelse | EN, FCC |
| Sikkerhed | UL/CUL, TUV |
| LED indikatorer | Ja |
Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.