Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

NEETS Control - TanGo

Produktet kan p.t. ikke leveres, og er muligvis udgået. Kontakt os venligst for hjælp til at finde et tilsvarende produkt.
NEETS Control - TanGo (310-0305)

NEETS Control - TanGo

Varenr.:
310-0305
  • Type Industriel
Beskrivelse

Neets Control – TanGo is a powerful control system enabling intuitive touch control through Android/iOS touch panels or standard browsers and you can create your own GUI design

For easy installation, the TanGo comes with PoE IN and PoE OUT to avoid need for external PSU for both the control system and an external device such as a touch panel.

- 3 Bi-directional RS-232 port or IR ports
- Used for controlling projectors, displays, amplifiers & other AV devices with feedback functionality
- 2 Uni-directional RS-232 or IR ports
- Used for sending commands to projectors or other AV devices using serial or infrared communication
- 8 General Purpose I/O ports
- Used for input/output control of relays, switches and sensors
- 4 Built-in low-voltage relays
- Used for controlling external devices as electrical screens
- Ethernet port
- Used for controlling 10 LAN and 8 Neets extension devices connection to Central Control and Project Designer as well as access to graphical user interface
- Power over Ethernet (PoE)
- PoE IN for power of the TanGo and PoE OUT for power of an external device such as touch panel
- Email notifications and warnings
- Email notification on lamp/filter hours and warnings
- 1 NEB port (Neets Expansion Bus)
- Add up to 5 additional devices - choose between Keypad, Level Control or Port Expansion (serial and I/O)
- 1 front USB port
- Used for easy system configuration, uploading and downloading project files
- Built-in Infrared Learner
- IR learner built into the front for easy IR code learning
- Easy mounting
- Can be mounted in trunking systems hidden from sight, or in the 1U Neets Rack Shelf
- PoE powered
- Power the TanGo with a compliant PoE power supply or switch (PoE injector not included)
- Link to compliant PoE Injector

RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 – 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block

IR learn:
IR Learn frequency 1 KHz to 150 KHz

Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block

Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block

Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.