Chassis |
• ASR-9010-AC and ASR-9010-DC
• ASR-9006-AC and ASR-9006-DC
• ASR-9010-AC-V2 and ASR-9010-DC-V2
• ASR-9006-AC-V2 and ASR-9006-DC-V2
|
|
Line cards |
● A9K-40GE-L
• A9K-40GE-B
• A9K-40GE-E
• A9K-8T/4-L
• A9K-8T/4-B
• A9K-8T/4-E
● A9K-4T-L
• A9K-4T-B
• A9K-4T-E
• A9K-2T20GE-L
• A9K-2T20GE-B
• A9K-2T20GE-E
|
• A9K-8T-L
• A9K-8T-B
• A9K-8T-E
• A9K-16T/8-B
• A9K-SIP-700
• A9K-2X100GE-TR
• A9K-2X100GE-SE
• A9K-24X10GE-TR
• A9K-24X10GE-SE
• A9K-MOD80-SE
• A9K-MOD80-TR
|
|
Redundancy |
• No single point of failure
• Fabric redundancy
• Power supply redundancy
• RSP redundancy (both RSPs must be the same version, either A9K-RSP440-TR or A9K-RSP440-SE)
• Software redundancy
|
|
Power supply |
● A9K-3KW-AC
• A9K-2KW-DC
• A9K-1.5KW-DC
• PWR-3KW-AC-V2
• PWR-2KW-DC-V2
|
|
Physical specifications |
● Occupies one slot; dual redundant RSPs in two slots in Cisco ASR 9010 and ASR 9006 chassis
• Height: 1.65 inches (4.2 cm)
● Width: 16 inches (40.6 cm)
• Depth: 26.53 inches (67.4 cm)
• Weight: 20 lb (9 kg)
|
|
Power input |
• Worldwide ranging AC (200–240V; 50–60 Hz; 16A nominal)
• Worldwide ranging DC (–48V to –60V; –54V; 50A nominal)
|
|
Environmental conditions |
● Operating temperature: 32 to 104°F (0 to 40°C)
● Storage temperature: –40 to 167°F (–40 to 75°C)
● Relative humidity: 10 to 90%, noncondensing
● Regulatory compliance
|
|
Power consumption |
• Typical: 170 W
• Maximum: 450 W
|
|
Environmental Specifications |
|
Operating temperature (nominal) |
41 to 104ºF (5 to 40ºC) |
Operating temperature (short-term) |
23 to 131ºF (–5 to 55ºC) Note: Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year (a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period). |
|
Operating humidity (nominal) (relative humidity) |
10 to 85% |
|
Operating humidity (short-term) |
5 to 90% Note: Not to exceed 0.024 kg water or dry air |
|
Storage temperature |
–40 to 158ºF (–40 to 70ºC) |
|
Storage (relative humidity) |
5 to 95% Note: Not to exceed 0.024 kg water or dry air. |
|
Operating altitude |
–60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements) |
|
Compliance |
|
Network Equipment Building Standards (NEBS) |
Cisco ASR 9000 is designed to meet:
• SR-3580: NEBS Criteria Levels (Level 3)
• GR-1089-CORE: NEBS Electromagnetic Compatibility (EMC) and Safety
• GR-63-CORE: NEBS Physical Protection
• VZ.TPR.9205: Verizon TEEER
|
ETSI standards |
Cisco ASR 9000 is designed to meet (qualification in progress):
• EN300 386: Telecommunications Network Equipment (EMC)
• ETSI 300 019 Storage Class 1.1
• ETSI 300 019 Transportation Class 2.3
• ETSI 300 019 Stationary Use Class 3.1
• EN55022: Information Technology Equipment (Emissions)
• EN55024: Information Technology Equipment (Immunity)
• EN50082-1/EN-61000-6-1: Generic Immunity Standard
|
|
EMC standards |
Cisco ASR 9010 is designed to meet:
• FCC Class A
• ICES 003 Class A
• AS/NZS 3548 Class A
• CISPR 22 (EN55022) Class A
• VCCI Class A
• BSMI Class A
• IEC/EN 61000-3-2: Power Line Harmonics
• IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
• EN 50121-4: Railway EMC
|
|
Immunity |
Cisco ASR 9010 is designed to meet:
• IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)
• IEC/EN-61000-4-3: Radiated Immunity (10V/m)
• IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)
●
IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)
• IEC/EN-61000-4-5: Signal Ports (1kV)
●
IEC/EN-61000-4-5: Surge DC Port (1kV)
• IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)
• IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)
• IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
• EN 50121-4: Railway EMC
|
|
Safety |
Cisco ASR 9010 is designed to meet:
• UL/CSA/IEC/EN 60950-1
• IEC/EN 60825 Laser Safety
• ACA TS001
• AS/NZS 60950
• FDA : Code of Federal Regulations Laser Safety
|
|