Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

ARCTIC COOLING Case acc Fan 14cm P14 PWM PST b

Forsiden Computerkomponenter Køling ARCTIC COOLING Case acc Fan 14cm P14 PWM PST b
ARCTIC COOLING Case acc Fan 14cm P14 PWM PST b (ACFAN00125A)

ARCTIC COOLING Case acc Fan 14cm P14 PWM PST b

Varenr.:
ACFAN00125A
EAN:
4895213701563
  • Brugt areal PC køleventilator
  • Fan diameter 14cm
116,-
145,- inkl. moms
På lager 19
Antal:
Beskrivelse

P14 PWM PST


Pressure-optimised 140 mm Fan with PWM PST

Optimised for Static Pressure During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 1700 RPM
regulated via PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.


Specifications:

Fan:
  • 140 mm, 200 – 1.700 RPM (Controlled by PWM)
Air Flow:
  • 72.8 CFM / 123.76 m³/h (@ 1.700 RPM)
Noise Level:
  • 0.3 Sone (@ 1.700 RPM)
Static Pressure:
  • 2.4 mm H2O (@ 1.700 RPM)
Typical Voltage:
  • + 12 V DC
Start-up Voltage:
  • 3.9 V DC
Cable Length:
  • 400 mm
Sub PST Cable Length:
  • 50 mm
Connection Motherboard:
  • + 12 V DC, PWM control signal, 4-pin connector + 4-pin socket

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.